佛山市佛冶机械设备有限公司

Welcome To - Foshan FoYe Machinery & Equipment Co., Ltd.!

15360508607 | nicky@tcbal.com

Product Center
Straightening tube
Straightening tube

Straight into the upper and lower mold parts are connected by bolts and nuts; in the installation of straightening roller, the last pair of straightening roller roll waist distance should be; straightening straightening motor generally use 7。5Kw Of the three-phase asynchronous motor; where: V0: straightening speed n: straightening cylinder rotation speed; n? D60; d: bar diameter; so the required motor speed of 3000r / min;

Straightening tube is divided into two parts of the upper and lower molds are connected by bolts and nuts。 The material of the straightening cylinder is HT200。 The straightening roller is fixed to the cylinder wall by means of a nut during installation.

When the straightening roller is installed, the distance between the rollers of the last pair of straightening rollers should be the diameter of the straightened reinforcing bar. The distal end of the roll of the other straightening rollers should exceed the centerline of the straightening cylinder by 3 mm to 10 mm.

Rectifier straightening motor generally use 7。5Kw three-phase asynchronous motor can be。


Previous: Cutting rack

下一条: Polishing machine blade

Mobile

潍坊鲁成玻璃钢 佛山市佛冶机械设备有限公司山东超鸿耐磨材料有限公司 上海快3 无锡永睿鸿温室工程有限公司 青州市正航环保科技有限公司 扬州金川照明器材有限公司 河南恒新机械有限公司 烟台亿丰岗亭制作有限公司 杭州非耀真空设备有限公司 东莞市平盛自动化科技有限公司